We have what can only be described as a fantastic Practice table , a Burroughs and watts build quality , thick slate with bolt into slate cushions , the cushion rubber is full size in full size blocks , so a full size ball or 2 inch ball could be used .
I would advise 2 inch balls though on this size of table .
This table is ideal if you play a lot of snooker yet do not have room for a full size snooker table .
the slates have nut inserts for the cushion bolts built into them just a like a full size slate bed table .
most small 7ft tables are built with wood screw on cushions , I would say 99% are made with wood screw on cushions , this table is built the same as a full size table .The table will come with two sets of balls , a pool and snooker set , rests and cues , light fitting , triangle .
the cloth and rubber was renewed and not played on much so is in very good order 9/10 condition .
I have Acetone’d erased the baulk and D lines out on dismantle, to erase the line for re-fitting of bed cloth .
Nets leathers and ball rails in very good condition .
Frame and cushions made from high grade Mahogany , Welsh slates , find another made as good as this one .
This can only be described as in Fantastic condition , and the photos back this up .
The price including delivery and set up on ground floor by qualified Billiards fitter is £1500 within 100 mile radius of Nottingham , or you can pick up yourself in dismantled and bubble wrapped parts for £1250 from Nottingham and I will help load the parts and slates .
Not many around built like this table . table is bubble wrapped and stored correct , ready for immediate delivery and set up .
I was the last fitter who worked on this table for my client , I replaced the rubber and the cloth .
All inquiries to Geoff at GCL billiards
